Someone recently asked about advice for setting up a glass workshop. My work space was more of an evolution than a thought out plan. In fact, when I first started doing stained glass, my “workshop” was a plywood board on two saw horses in the breezeway between our house and garage. That changed the day I was cleaning up after a day of leading glass and saw a big snake coiled up under my table. After that I insisted on space in the garage!
My husband will say that my workspace is like a fungus. It keeps growing and taking over more and more of the garage. It’s a good thing he loves me! What started out as a work table and a few shelves in the garage has evolved into a pretty functional work space. Yes, I’d love more space, who wouldn’t, but all in all it works quite well. The picture above is an overview of the space. I have included several more pictures at the end of this post.
My workspace is a combination of shelves, old re-purposed furniture pieces, and work carts that my husband built. The sandblaster sits on top of an old computer desk. A mid-century modern book case holds molds. An Ikea unit, from my daughter’s college days stores frits. Wooden boxes fit on the shelves and make it very easy to move the frits to my work table. Then there are wheels, wheels, and more wheels! The tile saw and wet belt sander are on carts with wheels. They roll to wherever I need them to work on and store out of the way when I don’t. They all have shelves under them to hold whatever needs to go along with these tools. The rolling cart at the end of my table was supposed to be thrown out. But it has been sitting there and come in quite handy when I need to quickly clear my table to cut a large sheet of glass. My husband also built the glass storage unit. Knowing what I know now, I would make a few tweaks to this. The bottom shelf area needs to be high enough to store a half sheet of glass and I would make more space for full size sheets. It is on wheels but can’t be moved when fully loaded. We recently moved it to make room for the frit storage unit and only had to take off about half of the glass to move it.
The heart of the space is my work table. At 36.5” it is just the right height for me to comfortably cut glass and build glass panels. It has a plywood top that was screwed down. The idea was when it gets bad enough it can come off and a new sheet of plywood screwed down. It has shelves underneath which stores kiln shelves, lead and tools. I have small baskets that keep tools and items separated by function: cutting, leading, soldering, puttying. I have a second table that is a dedicated glass cutting area. It is an old folding table that is raised up on wood blocks. It also holds my very first baby kiln.
Here is what it boils down to:
- You need as much table surface as you can get. Particularly if you work with stained glass and/or work several projects at the same time.
- Shelves, shelves and more shelves. Can’t have enough of them. I definitely need more of these for my growing mold collection.
- If you don’t have dedicated space for equipment, put what you can on wheels.
- Good lighting is a must. I have several reflector lights including one on a pole with a cement base that I move around to wherever I need it.
- If you are lucky enough to be setting up your workspace from the ground up, get lots of electrical outlets on separate circuits. If I could I would put each kiln on a separate circuit and then have two more circuits. Can’t tell you how many times I have thrown the circuit breaker when I am using the heater or air conditioner in the garage.
I’d be happy to answer any specific questions if you leave a comment.