Fused Glass Experiment – Final

Here is the final piece. I sand blasted both sides to remove the tin bloom. Then I put the dish back in the mold and fired the kiln with a slump schedule but only held at the slump temperature for about 5 minutes. This was to soften the look of the sand blasting. You can see the “before” dish in the previous post.

Someone asked how I got the design on the glass. I used fiber paper to create a bas relief. If you want more information look at this post http://www.glassartbymargot.com/Blog/fused-glass/fused-glass-bas-relief/